Toro 03781TE Operator's Manual page 26

The ability to view and change the settings in the
Protected Menu can be changed. Once the Protected
Menu has been accessed, scroll down to Protect
Settings. Using the right button, changing Protect
Settings to Off will allow the ability to view and change
the settings in the Protected Menu without entering
the passcode. Changing Protect Settings to On will
hide the protected options and will require entering
a passcode to change the setting in the Protected
Menu. After the pass code has been set, the key
switch must be turned off and back on to enable and
save this feature.
Note:
If the passcode has been forgotten or
misplaced, please contact your distributor for
assistance.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Blade Count
1. In the Settings Menu, scroll down to Blade Count
2. Press the right button to change the Blade Count
between 5, 8, or 11 blades.
Setting the Mow Speed
1. In the Settings Menu, scroll down to Mow Speed.
2. Press the right button to select mow speed.
3. Use the center and right button to select the
appropriate mow speed set on the mechanical
mow-speed limiter on the traction pedal.
4. Press the left button to exit mow speed and save
the setting.
Setting the Height of Cut (HOC)
1. In the Settings Menu, scroll down to HOC.
2. Press the right button to select HOC.
3. Use the center and right button to select the
appropriate HOC setting.
Note:
If the exact setting is not displayed, select
the nearest HOC setting from the list displayed.
4. Press the left button to exit HOC and save the
setting.
Setting the Front and Rear Reel
Speeds
Although the front and rear reel speeds are calculated
by inputting the number of blades, mow speed, and
HOC into the InfoCenter, you can manually change the
setting to accommodate different mowing conditions.
1. Scroll down to the F Reel RPM, R Reel RPM,
or both.
2. Press the right button to change the reel speed
value. As the speed setting changes, the display
continues to show the calculated reel speed
based on blade count, mow speed, and HOC
that you previously entered, but the new value
also appears.
26