Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro Reelmaster 03781 Operator's Manual

•
Cutting unit carrier frame (2 per cutting unit)
•
Cutting unit lift arm pivot (1 per cutting unit)
Figure 52

Engine Maintenance

(Figure 52)
(Figure 52)

Engine Safety

•
Shut off the engine before checking the oil or adding oil
to the crankcase.
•
Do not change the governor speed or overspeed the
engine.

Servicing the Air Cleaner

Service Interval: Every 400 hours
Check the air-cleaner body for damage which could cause an
air leak. Replace it if it is damaged. Check the whole intake
system for leaks, damage, or loose hose clamps.
Service the air-cleaner filter only when the service indicator
(Figure 53) requires it. Changing the air filter before it is
necessary only increases the chance of dirt entering the engine
g015158
when the filter is removed.
1. Service indicator
Important: Be sure that the cover is seated correctly
and seals with the air-cleaner body.
1. Park the machine on a level surface, lower the cutting
units, engage the parking brake, shut off the engine,
and remove the key.
2. Pull the latch outward and rotate the air-cleaner cover
counterclockwise
43
Figure 53
(Figure 54).
g009709