Toro 03781TE Operator's Manual page 54

Figure 76
1. Rear screen latch
3. Clean the screen thoroughly of all debris.
Note:
To remove the screen, lift off the hinge
pins.
4. Clean both sides of the oil cooler/radiator area
(Figure 77) thoroughly with compressed air.
Start from the front and blow the debris out
toward the back. Then clean from the back
side and blow toward the front. Repeat the
procedure several times until all chaff and debris
is removed.
Figure 77
1. Oil cooler/radiator
Important:
with water will promote premature corrosion
damage to components and compact debris.
5. Close the rear screen and secure it with the
latch.
g200377
g020509
54
Cleaning the oil cooler/radiator