Philips LPC213 Series User Manual page 199

Philips Semiconductors
Volume 1
17.4 Operation
Bits 19:18 of the PINSEL1 register
- 0xE002 C004)" on page
of pin P0.25/AD0.4/AOUT. When these bits are 10, the DAC is powered on and active.
The settling times noted in the description of the BIAS bit are valid for a capacitance load
on the A
will cause settling time longer than the specified time.
User manual
75) control whether the DAC is enabled and controlling the state
pin not exceeding 100 pF. A load impedance value greather than that value
OUT
Rev. 01 — 24 June 2005
(Section 7.4.2 "Pin function Select register 1 (PINSEL1
UM10120
Chapter 17: A/D Converter
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
199