Philips LPC213 Series User Manual page 10

Table of Contents

Advertisement

Philips Semiconductors
Volume 1
address decoding for each peripheral. All peripheral register addresses are word aligned
(to 32-bit boundaries) regardless of their size. This eliminates the need for byte lane
mapping hardware that would be required to allow byte (8-bit) or half-word (16-bit)
accesses to occur at smaller boundaries. An implication of this is that word and half-word
registers must be accessed all at once. For example, it is not possible to read or write the
upper byte of a word register separately.
User manual
VECTORED INTERRUPT CONTROLLER
(AHB PERIPHERAL #126)
(AHB PERIPHERAL #125)
(AHB PERIPHERAL #124)
(AHB PERIPHERAL #3)
(AHB PERIPHERAL #2)
(AHB PERIPHERAL #1)
(AHB PERIPHERAL #0)
Fig 4. AHB peripheral map
Rev. 01 — 24 June 2005
UM10120
Chapter 2: Memory map
0xFFFF F000 (4G - 4K)
0xFFFF C000
0xFFFF 8000
0xFFFF 4000
0xFFFF 0000
0xFFE1 0000
0xFFE0 C000
0xFFE0 8000
0xFFE0 4000
0xFFE0 0000
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpc2131Lpc2132Lpc2134Lpc2136Lpc2138

Table of Contents