Table of Contents
Advertisement
Chapter 3 Overview
Display functions (continued)
Main menu
Submenu
Control
Restore factory settings Returns all settings to factory values
(continued)
Reset average power
Reset cumul. power
Dry contacts test
Settings
Local settings
In/Out settings
On/Off settings
Battery settings
Event log
Event filter
Event list
Reset event list
Fault log
Fault list
Reset fault list
User settings
The following table displays the options that can be changed by the user.
Attention! When a Network Management Card (NMC) is installed then the IP address can not be
changed via the LCD panel. The IP address can only be changed via serial port connection
to the NMC or via the NMC web interface.
User settings
Submenu
Local settings
Language
Date/time
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Function
Clears average power usage measurement
Clears accumulated power usage measurement
Tests dry contact relay outputs
Sets product general parameters
Sets Output parameters
Sets On/Off conditions
Sets battery configuration
Selects faults, alarms and/or events to display
Displays the stored events
Clears all stored events
Displays the stored faults
Clears all stored faults
Available settings
[language_name]
Select the desired language from the
list. Menus, status, notices and alarms,
UPS fault, Event Log data and settings
are in all supported languages.
Format:
[International] [US]
Default settings
[English]
[International]
17
Advertisement
Table of Contents
