Table of Contents
Advertisement
Main menu
Submenu
Identification
Register product
User settings
The following table displays the options that can be changed by the user.
Local settings
In/Out settings
10
6U Rack or Tower UPS RT8.0kVA and RT11.0VA and Maintenance Bypass Installation and User's Guide
Submenu
Language
Date/time
LCD
Audible alarm
Output voltage
Output frequency
Output mode
Input volt hysteresis
Function
Displays [Product type/model] / [Part/Serial number]
/ [UPS/NMC firmware] / [Com card IPv4], [Com card
IPv6], [Com card MAC] / [Detected accessories]
Link to Lenovo website
Available settings
[language_name]
Select the desired language
from the list. Menus, status,
notices and alarms, UPS
fault, Event Log data and
settings are in all supported
languages.
Format:
[International] [US]
Modify LCD screen
brightness and contrast
to be adapted to room light
conditions.
[Enabled] [Disabled on
battery] [Always disabled]
Enable or disable the
buzzer if an alarm occurs.
[200V] [208V] [220V] [230V]
[240V] [250V]
Can be changed only in
Standby mode
Frequency converter:
[Enabled] [Disabled]
Frequency settable in
frequency converter mode
[Industrial] [Network]
Set UPS behavior regarding
transfer on BypassNeed
better description - Paul
S./David W.
Sets input voltage
hysteresis from 1 to 10V
Default settings
[English]
[International]
[Enabled]
[230V]
[Disabled]
[Network]
[10V]
Advertisement
Table of Contents
