Table of Contents
Advertisement
Chapter 2 UPS Safety Instructions
Chapter 2 UPS Safety Instructions
SAVE THESE INSTRUCTIONS. This manual contains important instructions that should be
followed during installation and maintenance of the Maintenance Bypass Panel (MBP), the
Uninterruptible Power Supply (UPS) and batteries.
The UPS models that are covered in this manual are intended for installation in an environment
within 0 °C / 32 °F to 40 °C / 104 °F, free of conductive contaminant.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Certification standards
Safety: IEC/EN 62040-1 / Ed.1: 2008. UL 1778 4th edition
•
EMC: IEC/EN 62040-2 / Ed.2: 2006. FCC part 15 Class A.
•
Performance: IEC/EN 62040-3 / Ed.2.0: 2011.
•
IEC 61000-4-2 (ESD): level 3.
•
IEC 61000-4-3 (Radiated field): level 3.
•
IEC 61000-4-4 (EFT): level 4.
•
IEC 61000-4-5 (Fast transients): level 4.
•
IEC 61000-4-6 (Electromagnetic field): level 3.
•
IEC 61000-4-8 (Conducted magnetic field): level 4.
•
Special symbols
The following are examples of symbols used on the UPS or accessories to alert you to
important information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock
symbol.
Important instructions that must always be followed.
Information, advice, help.
4
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Advertisement
Table of Contents
