Table of Contents
Advertisement
Chapter 3 Overview
Control panel
The UPS has a five-button graphical LCD front panel. It provides useful information about the
UPS itself, load status, events, measurements, and settings. It also provides a method to
change settings.
* Bypass mode: For 8/11kVA UPSs, in the event of a UPS overload or internal failure, the UPS powers
your equipment directly from utility power.
Battery mode is not available and your equipment is not protected; however, the utility power
continues to be passively filtered by the UPS.
The following table shows the indicator status and description:
Indicator
Green
Amber
Amber
Red
12
Online mode indicator (green)
Battery mode indicator (amber)
Bypass mode indicator (amber)
Fault indicator (red)
Escape
Up
Down
Enter
On / Off button
Status
Description
On
The UPS is operating normally in Online or in High
Efficiency mode.
On
The UPS is in Battery mode.
On
The UPS is in Bypass mode.
On
The UPS has an active alarm or fault. See
faults
in
Cha pter 11
for additional information.
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
*
Alarms and
Advertisement
Table of Contents
