Table of Contents
Advertisement
Chapter 3 Overview
Fault Log
Fault list
Reset fault list
Identification
Product Type/Model
Part/Serial Number
UPS/NMC Firmware
COM card IPv4
COM card IPv6
COM card MAC
This menu structure may vary from UPS model to another UPS model. This structure overview
has been provided as a general guide line.
Display functions
Press the Enter () button to activate the menu options. Use the two middle buttons (▲ and
▼) to scroll through the menu structure. Press the Enter () button to select an option. Press
the return to the previous menu.
Main menu
Submenu
Measurements
Control
Go to bypass
Go back normal
Start battery test
Reset fault state
16
Function
[Load] W VA A pf / [Input/Bypass] V Hz / [Output/Efficiency]
V Hz % / [Battery] % min V n° / [DCbus] V / [Average power
usage] Wh / [Cumulative power usage] Wh since date
Transfers the UPS to internal Bypass mode, only available if
the UPS is in on-line mode
Transfers the UPS back to on-line mode if the UPS has been
set to internal Bypass mode
Starts a manual battery test
Clears active fault
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Advertisement
Table of Contents
