Rear panels
Figure 1. 5594-8KX, 5594-8PX
Figure 2. 5594-9KX, 5594-9PX
Figure 3. 5594-9BX Extended Battery Module
Control panel
The UPS has a five-button graphical LCD front panel. It provides useful information about the UPS itself,
load status, events, measurements, and settings. It also provides a method to change settings.
6
6U Rack or Tower UPS RT8.0kVA and RT11.0VA and Maintenance Bypass Installation and User's Guide
RS232 communication port
USB communication port
Dry (relay) contacts communication port
Connector for Remote On/Off (ROO) control
Connectors for automatic recognition of battery
module
Connector for Remote Power Off (RPO) control
Slot where UPS Network Management Card is
installed
Connector for battery module power
Terminal blocks for AC power input and output
Connector for HotSwap MBP detection
Connectors for battery modules (to the UPS or
to the other battery modules)
Connectors for automatic recognition of battery
modules (UPS-to-EBM or EBM-to-EBM)
Battery circuit breaker