FusionPower6000
Maintenance Guide
Figure 6-16 Removing the branch monitoring module
Step 3 Install the new branch monitoring module and reconnect the cables (if any).
----End
6.9 Replacing a Fuse for the Secondary Circuit
Prerequisites
When replacing a fuse, wear insulated gloves and do not touch conductors.
●
●
Procedure
Step 1 Pull the fuse handle outwards and remove the fuse.
Figure 6-17 Removing a fuse
Issue 02 (2022-07-18)
CA UTION
Tools: insulated gloves, step ladder
Material: a new and intact fuse of the same model
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Component Replacement
53