Component Replacement; Replacing A Pad - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
● Before the replacement, ensure that the loads are not affected or obtain
● During the replacement, wear dedicated protective gears such as insulated
● If you open the cabinet door during the replacement, clear the sundries from
● If you remove the protective cover during the replacement, reinstall it after the
● Dispose of the replaced faulty component in accordance with the local disposal
● Replacing a component may cause data loss. Therefore, replace a component

6.1 Replacing a PAD

Prerequisites
●
●
Procedure
Step 1 Install the FusionModule app on the new PAD and connect the PAD to the
network over the WiFi hotspot of the ECC800-Pro.
Step 2 Enter the user name and password to log in to the app on the new PAD and check
that the app works properly.
Step 3 Remove the charging cable from the old PAD.
Issue 02 (2022-07-18)
6
CA UTION
written consent from the customer.
gloves, goggles, safety clothing, helmet, and shoes.
the cabinet when you finish the replacement. After confirming that the
equipment is running properly, close the cabinet door.
replacement.
act for waste electrical equipment.
as soon as possible while ensuring safety.
Tools: ESD wrist strap, ESD gloves, label, marker
Material: a new and intact PAD of the same model
Copyright © Huawei Digital Power Technologies Co., Ltd.

Component Replacement

6 Component Replacement
42