Exporting Data - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
●
●
----End

7.9.5 Exporting Data

Context
●
●
●
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Issue 02 (2022-07-18)
Click One-Click Layout. The Set One Click Layout Type dialog box is
displayed. Select Left to right(transformer on the left) or Right to
left(transformer on the right) based on the actual scenario of the
FusionPower6000. Set the parameter based on the actual situation.
Figure 7-22 Plan view layout
Drag the icons of registered devices and devices on the cabinet list to the
corresponding positions in the layout diagram. Click a device icon. On the
Basic Configuration page, modify the value of Device Name and Device No..
Click Exit Edit Mode to create a FusionPower6000 plan view.
NO TE
If there are spaces without any devices deployed, use the placeholder icon in the cabinet list
to fill in the view. Click the placeholder icon. The Basic Configuration dialog box is
displayed. Change the value of Cabinet width.
To modify the FusionPower6000 plan view, perform the following steps:
1. Choose Home > Plan View.
2. Click Modify Device in Power Module View. The Devices list is displayed.
3. Drag registered devices to the appropriate positions in the layout diagram and click Exit
Edit Mode. The FusionPower6000 plan view is updated.
Export Historical Data: You can export historical alarms, active alarms,
performance data, operation logs, and access events of the system for viewing
and analyzing events.
Export Device Data: You can export device data in system.
If Encryption Password is selected, the exported data package will be
encrypted, and you need to enter the encryption password to decompress the
data package. To ensure data security, you are advised to select Encryption
password.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
115