Configuration Wizard - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
----End

7.8.4 Configuration Wizard

Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Maintenance > Configuration Wizard to access the parameter setting
page for the configuration wizard.
Step 3 Configure related parameters on the page as instructed. For details, see the
function description on the left of the page.
Step Operation
Power Setting the
Module system type
Settings and power
module
name
Basic Param Setting WiFi
Settings parameters
Setting the
time zone
and time
Issue 02 (2022-07-18)
NO TE
● If no SIM card is installed, set Cloud service access mode to FE.
● If the Cloud service access mode is set to FE, you need to configure the IP address of
the DNS server on the ECC WebUI.
NO TE
The configuration wizard is displayed after you log in for the first time, skip cloud service
access, or change the system type to FusionPower6000.
NO TE
● In the process, click Previous, Next, and Skip as required. If the Video Settings and
Access Management functions are not involved, you can click Next or Skip.
● To exit before the configuration is complete, click Finish to terminate the configuration
directly.
Parameter
System type
Power
module
name
Enable WiFi
WiFi SSID
WiFi
password
Local time
zone
Copyright © Huawei Digital Power Technologies Co., Ltd.
Setting
FusionPower6000
Set this parameter based on the site
plan.
Enable
Set this parameter based on the site
plan.
Set this parameter based on the site
plan.
Set this parameter to the time zone
of the site.
7 FAQ
Description
If the
system type
is changed,
the software
will restart
and you can
log in again
after 3
minutes.
-
You are
advised to
change your
password
periodically.
-
96