Huawei FusionPower6000 Maintenance Manual page 10

FusionPower6000
Maintenance Guide
●
●
●
●
●
Personnel Requirements
●
●
●
●
●
●
●
●
●
Issue 02 (2022-07-18)
If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
Do not power on the equipment before it is installed or confirmed by
professionals.
Before handling a conductor surface or terminal, measure the contact point
voltage and ensure that there is no risk of electric shock.
Do not touch a running fan with your fingers, components, screws, tools, or
boards before the fan is powered off or stops running.
In the case of a fire, immediately leave the building or the equipment area
and activate the fire alarm or call emergency services. Do not re-enter the
building or affected area until it has been deemed safe by qualified
professionals.
Only professionals and trained personnel are allowed to operate the
equipment.
– Professionals: personnel who are familiar with the working principles and
structure of the equipment, trained or experienced in equipment
operations and are clear of the sources and degree of various potential
hazards in equipment installation, operation, maintenance
– Trained personnel: personnel who are trained in technology and safety,
have required experience, are aware of possible hazards on themselves in
certain operations, and are able to take protective measures to minimize
the hazards on themselves and other people
Personnel who plan to install or maintain the equipment must receive
thorough training, understand all necessary safety precautions, and be able to
correctly perform all operations.
Only qualified professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
Only qualified professionals are allowed to remove safety facilities and inspect
the equipment.
Personnel who will perform special tasks such as electrical operations,
working at heights, and operations of special equipment should possess the
required local national qualifications.
Only authorized professionals are allowed to replace the equipment or
components (including software).
Keep irrelevant people away from the equipment. Only operators are allowed
to access the equipment.
Comply with local standards and regulations.
Observe the electrical safety regulations, such as the operation and work
ticket mechanisms.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
3