Huawei FusionPower6000 Maintenance Manual page 22

FusionPower6000
Maintenance Guide
●
Moving Heavy Objects
●
●
●
●
●
●
●
Figure 1-2 Requirements on the cabinet tilt angle
●
Issue 02 (2022-07-18)
Only professionals are allowed to hoist the transformer. The safety factor of
the steel wire ropes should be at least 6. The angle between a steel wire rope
on the hook and the plumb line should not exceed 30°. The transformer
should be hoisted using its lifting lugs.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Choose a road with good conditions or sea for transportation to ensure
equipment safety. Avoid tilt or jolt during transportation.
Move a cabinet with caution. Any bumping or falling may damage the
equipment.
To prevent internal structure deformation, ensure that the tilt angle during
transportation is within 15°.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
15