FX
/FX
/FX
3S
3G
3GC
Built-in Positioning Functions
3.3.2
Setup of Input/Output Connection Connector
1. Applicable connector (connector purchased at store)
Use a 20-pin (1-key) socket that conforms to the requirements of the MIL C-83503.
Preliminarily check that the peripheral parts, such as the connector cover, will not cause any interference.
2. Input/output cables (optional cables manufactured by our company)
Mitsubishi Electric can provide input/output cables already equipped with a connector.
FX-16E-500CAB-S
FX-16E-150CAB
FX-16E-300CAB
FX-16E-500CAB
FX-16E-150CAB-R
FX-16E-300CAB-R
FX-16E-500CAB-R
FX-A32E-150CAB
FX-A32E-300CAB
FX-A32E-500CAB
3. Input/output cable connectors prepared by purchaser (optional connectors manufactured
by Mitsubishi Electric)
The purchaser should prepare the cables and press-fitting tools.
FX
-I/O-CON, for flat
2C
cable
FX
-I/O-CON-S, for
2C
non-stranded cable
FX
-I/O-CON-SA,
2C
for non-stranded
cable
FX-I/O-CON2, for flat
cable (40 Pin)
FX-I/O-CON2-S
non-stranded cable
(40 Pin)
FX-I/O-CON2-SA
non-stranded cable
(40 Pin)
4. Connector already confirmed as applicable (available at stores)
Connectors manufactured by Daiichi Denshi Kogyo Co., Ltd. (shown in 3)
B - 46
Downloaded from
ManualsNet.com
/FX
/FX
PLC User's Manual - Positioning Control Edition
3U
3UC
Model
Length
5m
General-purpose input/output cable
(16' 4")
1.5m
(4'11")
3m
Cable for connection of FX Series
terminal block to input/output connector
(9'10")
For details on connection to the FX
5m
Series terminal block, refer to the
(16' 4")
following manuals:
1.5m
(4'11")
3m
(9'10")
5m
(16' 4")
1.5m
(4'11")
Cable for connection of A Series
3m
A6TBXY36 connector/terminal board
(9'10")
conversion unit to input/output
connector type
5m
(16' 4")
Input/output connector model and number
of connectors included in one set
Our model
(Manufactured by Daiichi
Denshi Kogyo Co., Ltd.)
Set of
Crimp-style connector
10 parts
FRC2-A020-30S
Housing HU-200S2-001
5 sets
Crimp-style contact HU-
411S
Housing HU-200S2-001
5 sets
Crimp-style contact HU-
411SA
Crimp-style connector
2 sets
FRC2-A040-30S
Housing HU-400S2-001
2 sets
Crimp-style contact HU-
411S
Housing HU-400S2-001
2 sets
Crimp-style contact HU-
411SA
search engine
Description
FX
Hardware Edition
3G
FX
Hardware Edition
3GC
FX
Hardware Edition
3U
FX
Hardware Edition
3UC
Description of parts
AWG28(0.1mm
1.27 pitch, 20 cores
AWG22(0.3mm
AWG20(0.5mm
AWG28(0.1mm
1.27 pitch, 40 cores
AWG22(0.3mm
AWG20(0.5mm
3 Connection of Input/Output Lines and Tightening Torques
Connector type
• Single wire (Wire color: red)
• PLC side: A 20-pin connector
• Flat cables (with tube)
• A 20-pin connector at both ends
• Round multicore cables
• A 20-pin connector at both ends
• Flat cables (with tube)
• PLC side: Two 20-pin connectors in
16-point units
• Terminal block side: A dedicated
connector
• One common terminal covers 32 input/
output terminals
Applicable cable
(recommended cable: UL-1061) and tool
Crimping tool
Cable size
(Manufactured by Daiichi
Denshi Kogyo Co., Ltd.)
2
357J-4674D main unit
)
357J-4664N attachment
2
357J-5538
)
2
357J-13963
)
357J-4674D main unit
2
)
357J-4664N attachment
2
)
357J-5538
2
)
357J-13963
3.3 Connector