Tool; Connector; Cable Connection To Input/Output Connector - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Built-in Positioning Functions
3.2.3

Tool

For tightening the terminal, use a commercially available small screwdriver
having a straight form that is not widened toward the end as shown right.
Note:
If the diameter of screwdriver grip is too small, tightening torque will not
be able to be achieved. To achieve the appropriate tightening torque
shown in the table on the previous page, use the following screwdriver or
appropriate replacement (grip diameter : approximately 25 mm (0.98")).
<Reference>
Phoenix Contact
3.3

Connector

Connectors conforming to the requirements of the MIL C-83503 are used for the FX
unit along with some types of FX
3.3.1

Cable Connection To Input/Output Connector

Prepare the input/output cables while referring to the next Subsection.
Example : FX
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
Manufacturer
2N
-32MT/D Main unit
3UC
search engine
Model names
SZS 0.42.5
/FX Series input/output extension blocks.
2NC
Input: X Output: Y
3 Connection of Input/Output Lines and Tightening Torques
0.4mm
(0.02")
/FX
3GC
Input Output
X0 X10 Y0
X1 X11 Y1
X2 X12 Y2
X3 X13 Y3
X4 X14 Y4
X5 X15 Y5
X6 X16 Y6
X7 X17 Y7
COM COM COM1
*1 *1 *1
*1: "•" means that the terminal is not used.
3.3 Connector
A
With
straight tip
B
2.5mm
(0.1")
Apx.
Series main
3UC
Y10
Y11
Y12
Y13
Y14
Y15
Y16
Y17
COM1
*1
B - 45