Connecting Method G - Connection Of Input/Output Powered Extension Unit; Connecting Method H - Connection Of Extension Block To Input/Output Powered Extension Unit - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
8.6.8

Connecting method G - connection of input/output powered extension unit

This subsection explains the procedures for connecting an input/output powered extension unit.
1
Remove the top cover (A in the right figure)
on the left side of the input/output powered
extension unit.
2
Connect the connector of the provided
extension cable (B in the right figure) to the
extension connector of the unit/block on
the upstream side (left side).
3
Connect the connector of the extension
cable (supplied) (B in the right figure) to the
extension connector of the input/output
powered extension unit to be added.
4
Fit the top cover (A in the right figure).
8.6.9 Connecting method H - connection of extension block to input/output powered
extension unit
This subsection explains the procedures for connecting an extension block to an input/output powered
extension unit.
1
Remove the extension connector cover (A in
the right figure) on the right side of the input/
output powered extension unit.
2
Connect the extension cable (B in the right
figure) from the extension block to be added
(right side) to the extension connector of the
input/output powered extension unit.
• When connecting FX
• When connecting FX
added (right side) and the existing unit (main unit) with the supplied extension cable or the optional
extension cable.
3
Fit the extension connector cover (A in the right figure).
-1PSU-5V, read "input/output powered extension unit" as the unit.
3U
Series input/output powered extension unit FX
2N
8.6 Connecting Methods for Main Unit and Extension Devices
A
1
B
-1PSU-5V, connect the unit to be
3U
8 Installation In Enclosure
4
A
B
2
121
1
2
3
4
5
6
7
8
9
10