High-Speed Output Special Adapter [Fx 3U -2Hsy-Adp - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Built-in Positioning Functions
2.5.6 High-Speed Output Special Adapter [FX
This section describes the output specifications of the high-speed output special adapter (FX
Pulse output form
Load current
Maximum output frequency
Insulation
Cable length
1. Internal output circuit
Equivalent to
Equivalent to
*1.
*2.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
Item
Differential line driver system (equivalent to AM26C31)
25 mA or less
200KHz
Photocoupler and transformer insulate PLC from external lines of its outputs, and
transformer insulates each SG.
10 m, maximum
High-speed output
special adapter
FX -2HSY-ADP
3U
5V
Y0/2+
AM26C31
Y0/2-
5V
Y4/6+
Y4/6-
SGA
*2
SGA
5V
Y1/3+
AM26C31
Y1/3-
5V
Y5/7+
Y5/7-
SGB
SGB *2
To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
The line between the SGA and the SGB is insulated.
search engine
-2HSY-ADP]
3U
High-speed output special adapter (FX
To connect to photocoupler:
Pulse train,
forward rotation pulse train
Direction signal, reverse
rotation pulse train
To connect to differential line receiver:
Pulse train,
forward rotation pulse train
Direction signal, reverse
rotation pulse train
2 Specifications
2.5 Output Specifications
-2HSY-ADP).
3U
-2HSY-ADP)
3U
Servo amplifier
(Drive unit)
Grounding *1
Servo amplifier
(Drive unit)
Grounding *1
A
B
Apx.
B - 39