Huawei FusionDC1000A Commissioning Manual page 57

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
Path
Step 3 Click Submit.
Step 4 Set NetEco communications parameters and authentication password on the
ECC800-Pro WebUI.
Table 4-11 NetEco parameters
Path
System
Settings >
NMS
Application
> NetEco >
Communicat
ion
Parameters
Table 4-12 Setting an authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 5 Click Submit.
----End
Issue 01 (2021-04-20)
Parameter Default
Value
Default 192.168.8.1
gateway
Parameter Default
Value
Server IP 192.168.8.
11
Port number 31220
Network port WAN_1
for link setup
Parameter Default
Value
Authenticatio Modifyme
n password _123
Confirm -
authenticatio
n password
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning Core Devices
Setting
Set this parameter based on the
default gateway address assigned by
the network administrator.
Setting
IP address of the primary NetEco
server
NOTE
The NetEco IP address and the ECC800-
Pro IP address must be configured in
the same network to ensure normal
connection between the NetEco and
the ECC800-Pro.
31220
WAN_1
Setting
Set this parameter based on
customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
-
51