Obtaining The Neteco Software License; Logging In To The Neteco Client - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
●
●
Table 4-8 IP address list
Item
Server IP
address

4.7.2.2 Obtaining the NetEco Software License

The NetEco software license is not provided together with software to the
customer. Therefore, obtain the NetEco software license in advance.
Obtain the license from the Huawei's enterprise support website.
●
●

4.7.2.3 Logging In to the NetEco Client

This section describes how to log in to the NetEco client using a web browser.
Prerequisites
Valid user name and password are available.
Procedure
Step 1 In the browser address box, enter https://
and then press Enter.
● 192.168.8.11 is the default IP address of the NetEco.
● Latest Chrome (Stable Channel) and Firefox (ESR Release) are recommended.
● You are advised to set the display resolution as 1920*1080 or higher.
● Make sure that the IP address of the NetEco server is not contained in the compatibility view
website.
Issue 01 (2021-04-20)
The NetEco server can communicate with managed devices.
The NetEco server can communicate with Web clients.
NO TE
The subnet mask of all IP addresses is 255.255.255.0.
Preinstallation Setting
192.168.8.11
For enterprise users:
a. Log in to Huawei's enterprise support website https://
support.huawei.com/enterprise.
b. Browse or search for NetEco License Application Guide, and apply for
the license of the NetEco software by referring to the guide.
For carriers:
a. Log in to Huawei's carrier support website https://support.huawei.com.
b. Browse or search for NetEco License Application Guide, and apply for
the license of the NetEco software by referring to the guide.
NO TE
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning Core Devices
Description
Used for logging in to the NetEco and
PowerEcho.
IP address of the NetEco server :31943,
45