Performing Basic Operations Before Adding Devices - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
2.
----End

4.7.2 Performing Basic Operations Before Adding Devices

Software installation and commissioning are required before the device
commissioning, collector commissioning, and NetEco commissioning. For details,
see NetEco Product Documentation. Commission the software by referring to
relevant sections in NetEco Software Installation and Commissioning Guide.
Issue 01 (2021-04-20)
Figure 4-10 WebUI login page
On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
NO TE
– After the first login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. Huawei will not be
liable for any security issues caused by your failure to change the preset password
in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning Core Devices
43