Table of Contents
Advertisement
Nokia IP1200 Series Security Platform Overview
Figure 7 Power Supply and Fan Unit Locations
Power supplies
Status LEDs
Grounding studs
0030
Power cord receptacle
Power switch
Fan unit
Power Supplies
The Nokia IP1200 Series Security Platform supports up to two power supplies
for power sharing and redundancy. The IP1260 comes with two power
supplies as the standard package. The IP1220 comes with power supply; a
second one is optional. The power supplies are hot swappable and perform
load sharing while two active power supplies are installed, increasing the life
of the power supplies.
Note
On an appliance with two active power supplies installed, both power
supplies should be turned on for load sharing and redundancy. If both
power supplies are not turned on, the Fault LED illuminates. For more
information about the power supply status LEDs, see
"Power Supply
Status LEDs"
on page 34.
The power supplies are autosensing and can accept input voltages between
85 VAC and 264 VAC. The power supply output is regulated to a tolerance of
± 5 percent of the specified output voltage.
Nokia IP1200 Series Security Platform Installation Guide
33
Advertisement
Table of Contents
