Connectors And Cables; Figure 28 Single-Port E1 Nic Front Panel Details - Nokia IP1200 Series Installation Manual

5
Connecting PMC Network Interface Cards
You can configure and monitor E1 interfaces by using Nokia Network
Voyager, the Web-based element manager configuration and monitoring
program for the Nokia IPSO operating system.
For information about how to access Network Voyager and the related
reference materials, see
Security Platform"

Figure 28 Single-Port E1 NIC Front Panel Details

Connectors and Cables

To connect the card to an E1 service, use a straight-through RJ-48 cable.
To connect the card to another CSU/DSU, use an RJ-48 crossover cable wired
as shown in
You can order appropriate adapter cables separately from Nokia (see
Contact Information"
96
Conformance with RFC 1661 (PPP), 1662 (PPP in HDLC-like framing),
1332 (PPP-IPCP), and Cisco HDLC
Compliance with ITUT G703
on page 47.
Figure 29 on page 98.
on page 3).
"Using Nokia Network Voyager to Manage Your
Nokia IP1200 Series Security Platform Installation Guide
00090
LOS (red LED)
REMOTE (yellow LED)
SYNC (green LED)
LOOP (yellow LED)
"Nokia