Table of Contents
Advertisement
About this Guide
This manual provides information for the installation and use of the Nokia
IP1200 Series Security Platforms. Installation and maintenance should be
performed by experienced technicians or Nokia-approved service providers
only.
This preface provides the following information:
In This Guide
This guide is organized into the following chapters and appendixes:
Nokia IP1200 Series Security Platform Installation Guide
In This Guide
Conventions This Guide Uses
Related Documentation
Chapter 1, "Overview"
Series Security Platform.
Chapter 3, "Installing the Nokia IP1200 Series Security Platform"
describes how to rack mount the security platform.
Chapter 2, "Performing the Initial Configuration"
physically connect it to a network and to a power source and how to make
the security platform available on the network.
Chapter 4, "Installing and Replacing Network Interface Cards"
how to install, monitor, and replace network interface cards (NICs).
presents a general overview of the Nokia IP1200
describes how to
describes
15
Advertisement
Table of Contents
