Before You Begin - Nokia IP1200 Series Installation Manual

8
Installing and Replacing Other Components

Before You Begin

To upgrade or replace your Nokia IP1200 Series Security Platform memory,
you need:
Caution
To protect the IP1200 Series and the memory modules from
electrostatic discharge damage, make sure you are properly
grounded before you touch these components. Use a grounding
wrist strap and follow the instructions provided with the wrist strap
before you handle the components or open the appliance. If you do
not have a grounding wrist strap, make sure you are properly
grounded before you touch any electronic component.
Note
Because power to an IP1200 Series is automatically disconnected when
the chassis assembly is opened, you do not need to manually disconnect
the power for this procedure. Any servicing of the appliance, however,
should be completed with the chassis assembly fully removed from the
appliance.
To add or replace DIMMs
1. Use Nokia Network Voyager or Lynx to perform an orderly shutdown of
130
Physical access to the appliance
Nokia memory upgrade kit and accompanying documentation
Access to the appliance by using Nokia Network Voyager or Lynx
the IP1200 Series.
For information about how to access Network Voyager and the related
reference materials, see "To open Nokia Network Voyager"
Nokia IP1200 Series Security Platform Installation Guide
on page 47.