Table of Contents
Advertisement
The following table shows possible boot flags.
Flag
-d
-s
-v
Viewing the Variables and Other System Parameters
printenv
Use the printenv command to view the values of variables currently stored in
the boot manager nonvolatile memory. The command has the following
syntax:
printenv
For example:
BOOTMGR[93]> printenv
NOKIA IPSO BOOTMGR VERSION=3.7 07.05.2003-130000
autoboot: YES
testboot: NO
bootwait: 3
boot-file: /image/current/kernel
boot-flags:
boot-device: wd0
vendor: Nokia
model: IP
bmslice: 4
Nokia IP1200 Series Security Platform Installation Guide
Meaning
Debug mode—enters the kernel debugger as soon as possible
in the kernel initialization.
Single-user mode—if the console is marked as insecure, you
must enter the root password to access the manager.
Verbose mode—verbose during device probing and thereafter.
Variables
101
Advertisement
Table of Contents
