Connecting Power And Turning The Power On - Nokia IP200 Series Installation Manual

2. Connect the other end of the cable to the VT100 console or to a system

Connecting Power and Turning the Power On

A power switch and a receptacle for the power cord are located on each power
supply on the back of the appliance as shown in
Nokia IP200 Series Security Platform Installation Guide
If you connect the console port to a data communications equipment
(DCE) device, use a straight-through cable.
IP260
For cable pin assignments for the console connection, see
page 23.
running a terminal-emulation program.
Connecting Power and Turning the Power On
Figure 8.
00024
Console port
Figure 4 on
41