Table of Contents
Advertisement
Caution
To avoid damage to the ejector and locking lever, loosen the two retaining screws
before you remove the hard-disk drive. Once screw is located behind the ejector and
locking lever, and the other screw is on the opposite side.
Table 7 Hard-Disk Drive LEDs
LED
Activity
Status
Power Supplies and Fan Unit
The power supplies and fan unit are located at the rear of the IP1200 Series appliance, as shown
in
Figure
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
LED State
Off
Blinking green
Solid red
Solid green
Off
Blinking green
6.
Nokia IP1200 Series Security Platform Overview
Meaning
No current disk activity.
Current disk activity.
hard-disk drive is turned on but is malfunctioning.
hard-disk drive is turned on and is functioning.
One of the following:
• hard-disk drive failed its test and was powered off.
• hard-disk drive is ready to be removed using the hot swap
feature.
One of the following:
• System is booting.
• hard-disk drive is starting up.
• System is testing the hard-disk drive.
Note
Do not remove the hard-disk drive if the Status LED is
blinking green.
25
Advertisement
Table of Contents
