Installing And Replacing Network Interface Cards - Nokia IP1200 Series Installation Manual

4
Installing and Replacing
Network Interface Cards
The Nokia IP1200 Series Security Platform may come with one of the
network interface cards (NICs) you ordered already installed. All NICs
installed in the IP1200 Series are housed in a 6U PMC carrier. Network
interface cards in the 6U PMC carrier are hot swappable.
Note
The Nokia IP security platforms are LAN devices that can also use Nokia
NICs for wide area or out-of-band network connections. In the latter case,
this must be done with local country approval for Nokia T1, E1, ISDN, or
other NICs. Refer to your reseller or distributor to determine if these NICs
are approved for a particular country. Specific NICs might not be available
for use in a particular country.
The IP1200 Series supports the following NICs:
Nokia IP1200 Series Security Platform Installation Guide
Four-port and dual-port 10/100 Ethernet
Dual-port fiber-optic Gigabit Ethernet
Dual-port copper Gigabit Ethernet
Single-port ISDN S/T
Single-port V.35 or X.21
Single-port T1
Single-port E1
61