Nokia IP1200 Series Installation Manual page 126

8
Installing and Replacing Other Components
To remove a hard disk drive without using the hot swap feature
1. If both of the following are true:
2. Loosen the retaining screws on both sides of the hard disk drive.
126
You are removing a hard disk drive used as part of a disk-mirroring
implementation, and
The hard disk drive is not active
you do not need to use the following substeps to shut down the operating
system. Instead, press the hot swap button on the hard disk drive and
proceed to step 3.
a. Access Network Voyager.
For information about how to access Network Voyager and the related
reference materials, see
47.
b. On the Network Voyager home page, click Config.
c. Scroll to the bottom and click Reboot, Shut Down System.
d. Click Halt.
e. Wait until the activity LED for the hard disk drive is extinguished.
f. Use power switch on the back panel to turn the appliance off.
Caution
To avoid damage to the ejection lever, loosen the retaining screw
behind each ejection lever before you remove the hard disk drive.
"To open Nokia Network Voyager"
Nokia IP1200 Series Security Platform Installation Guide
on page