Table of Contents
Advertisement
5. Gently pull the hard disk drive forward to remove it from the appliance.
6. Install a replacement hard disk drive into the empty hard disk drive bay.
7. Lock the hard disk drive in place by pressing the ejector and locking
8. Tighten the screws on both sides of the hard disk drive.
9. Press the recessed hot swap button again to restore power to the hard disk
10. Use Nokia Network Voyager, Lynx, or the CLI to implement disk
Nokia IP1200 Series Security Platform Installation Guide
lever.
drive.
The IP1200 Series recognizes the new hard disk drive.
mirroring.
Replacing a Hard Disk Drive
00316.1
125
Advertisement
Table of Contents
