Performance Considerations
To connect to a 1-Gbps hub, switch, or router, use a straight-through RJ-45
cable (Category 5 type cable, or as required by your network configuration).
Note
Certain circumstances might require shielded Category 5 Ethernet cables
to meet Class B emissions requirements.
Note
Nokia copper Gigabit Ethernet NICs support cable autosensing. You can
use a straight-through or crossover cable to connect the NIC to a gigabit
hub or switch or to connect directly to a host.
In
Figure
18, the RJ-45 cable output connector is numbered from right to left,
with the copper pins facing up and toward you.
Nokia IP1200 Series Security Platform Installation Guide
83