Single-Port E1 Nic; Figure 27 T1 Crossover Cable Pin Connections - Nokia IP1200 Series Installation Manual

Security platform
Table of Contents

Advertisement

Figure 27 T1 Crossover Cable Pin Connections

Single-Port E1 NIC

Nokia IP1200 Series Security Platform support Nokia-approved, single-port
E1 cards. The IP1200 Series appliances can accommodate a maximum
number of four cards.
The Nokia E1 network interface card provides the following features:
Nokia IP1200 Series Security Platform Installation Guide
CTESPA includes a built-in channel service unit/data service unit (CSU/
DSU) for long and short-haul operations
Line speed to full E1
Direct, high-speed access for network connections over leased lines
On-board HDLC and Frame controllers, which allow operation at 2.048
Mbps
Up to 32 channels per card
Channels 0 and 16 can be used for inband signaling
IPSO supports only fractional channels
Fractional E1
Support for hot-swapping of NICs when used in IP1200 Series appliances
Tracing through tcpdump
1
2
3
4
5
6
7
8
00018.1
Single-Port E1 NIC
1
2
3
4
5
6
7
8
95

Advertisement

Table of Contents
loading

Table of Contents