Table of Contents
Advertisement
The connector on the NIC is an RJ-45 connector.
To connect the NIC to an ISDN service, use the supplied ISDN cable. Use of
another cable (not recommended) is at the customers discretion.
Figure 21
to left, with the copper tabs facing up and toward you. Accordingly, the
receptacle on the NIC is numbered from left to right.
Figure 21 Output Connector for the ISDN Cable
Single-Port V.35 or X.21 NIC
The Nokia IP1200 Series Security Platform supports a Nokia-approved,
single-port V.35 or X.21 NIC. The port type is automatically determined by
the type of cable attached to the NIC.
Nokia IP1200 Series Security Platform Installation Guide
shows the RJ-45 connector output connector numbered from right
8
1
Pin
Assignment
1
2
00270
3
TX
4
RX
5
RX
6
TX
7
8
Single-Port V.35 or X.21 NIC
87
Advertisement
Table of Contents
