Configuring And Activating Interfaces - Nokia IP1200 Series Installation Manual

4
Installing and Replacing Network Interface Cards
15. Press both levers to make sure that they are locked into place and power is
.

Configuring and Activating Interfaces

The Nokia IP1200 Series Security Platform automatically detects any new
NICs when the PMC carrier is completely installed. Use Nokia Network
Voyager to configure and activate the logical and physical interfaces on the
card.
70
restored to the card carrier.
The power indicator LED on the PMC carrier illuminates green.
If you are replacing a NIC with a new NIC of the same type, the Nokia
IPSO operating system automatically recognizes the NIC and applies the
original configuration to the new NIC.
If you are installing a new or different NIC, configure the new NIC by
using Nokia Network Voyager. For information about how to access
Network Voyager, see "To open Nokia Network Voyager"
Nokia IP1200 Series Security Platform Installation Guide
00315.1
on page 47.