Proposal Of Replacement With Renewal Tool For A0J2; Advantages Of Using Renewal Tool For A0J2 (Manufactured By Mitsubishi Electric System & Service Co., Ltd.) - Mitsubishi Electric MELSEC-A0J2H Series Handbook

1
INTRODUCTION

1.2 Proposal of Replacement with Renewal tool for A0J2

1.2.1 Advantages of using renewal tool for A0J2 (manufactured by Mitsubishi Electric
System & Service Co., Ltd.)
(1) Renewal tool for A0J2
This tool is for replacing the A0J2(H) system with the Q series. It is composed of the interface module to
which wiring terminal block of existing I/O module can be attached, components for a programmable
controller, and connection cable.
Also, the interface module has the conversion function that converts AC input into DC input and DC
output into relay output and triac output. The interface module can be replaced with the 40-pin
connector type DC I/O module.
(a) Configuration example of Renewal tool for A0J2
Programmable controller
Mounting plate
(fixing for programmable controller)
Mounting (Building-up type, double)
Terminal block
(for 100V/200VAC, LG and FG, and 24VDC)
Interface module (24 /28
Interface module (56 )
Base adapter (for 56 ) base adapter wide type
/32 )
indicates the components of the fixed stand kit of programmable
controller (SC-A0JQSEL-U2).
Form after assembly
1
- 7