Mitsubishi Electric MELSEC-A0J2H Series Handbook page 215

*1 Check that the specifications of leakage current of the used sensor and switches are equal to or less than the OFF current
value.
If leakage current is equal to or more than the OFF current specifications, take measures against it with referring to "Input
Module Troubleshooting" in the following handbook.
(Handbook for replacement)
Renewal tool for A0J2 series Transition from MELSEC-A0J2(H) series to renewal system using renewal tool
*2 The value when using the input module, QX41Y41P, QX41, etc. and 5ms is set at input response time in I/O assignment
setting of PLC parameter (10ms is set at default).
*3 The figure below shows the temperature derating chart.
Output load
current
*4 The value when using the output module,QX41Y41P, QY41P, etc.
*5 The weight of fixed stand of programmable controller depends on replacement type of renewal tool for A0J2.
*6 The external dimensions of the SC-A0JQIF28AS do not include those of its projection.
(A)
0.6
0.5
0.4
0.3
0.2
0.1
30 40 50
Ambient temperature
55 (­)
App
- 20