Reading (Reusing) Other Format Files - Mitsubishi Electric MELSEC-A0J2H Series Handbook

7
PROGRAMS REPLACEMENT

7.1.4 Reading (Reusing) other format files

(1) Reading (Reusing) GPPQ/GPPA files to GX Developer
This section explains the procedure to read (reuse) files in GPPQ/GPPA formats others than those of
the GX Developer.
Follow this procedure to convert a file format to the GX Developer file format.
Point
To read out (reuse) a program of a CPU module that is not supported by GX Developer, change PLC
type to convert it to the program of the CPU module that is supported by GX Developer in advance,
using "A/QnA to Q conversion support tool".
For operating procedure of the A/QnA to Q conversion support tool, refer to Section 7.1.5.
(a) GX Developer operating procedure
Project
(b) Setting screen
1)
5)
3)
2)
1) Drive/Path, System name, Machine name, and PLC type
Displays the location of the data created in GPPQ and GPPA.
Enter the system name and machine name of the data specified by the Drive/Path.
Click the [Browse] button to display the dialogue box asking you to select the system name and
machine name. Double-click and specify the files to be read.
2) Source data list
Displays the data created in GPPQ and GPPA.
Place a
For the selected comments, use the program Common tab or Local tab to configure the range of
the device comment to be read.
7
- 10
Import file
mark in the checkbox of the data name to select it.
Import from GPPQ format file
Import from GPPA format file
8)
7)
6)
4)