Huawei FusionDC1000A Maintenance Manual page 86

FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario)
Procedure
Step 1 On the controller home screen, tap Shutdown, turn off the outdoor unit fan
switch.
Step 2 Cut the cable ties that secure fan cables using diagonal pliers.
Step 3 Remove the fan wiring box cover (Torque < 2 N·m) using a Phillips screwdriver, as
shown by (1) in
head screwdriver.
Figure 4-20 Removing the fan and guard
Step 4 Loosen the waterproof cable terminal, as shown by (2) in
the cable out of the wiring box.
Step 5 Remove the four screws that secure the fan guard using a socket wrench, as
shown by (3) in
Step 6 Remove the four screws that connect the fan and guard using a hex key, and take
off the faulty fan.
Figure 4-21 Separating the fan from the guard
Issue 01 (2021-04-20)
Figure 4-20 and remove four cable terminals using a small flat-
Figure 4-20, and take off the fan and guard.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
Figure 4-20, and pull
78