FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario)
Figure 4-5 Removing smart cooling product fasteners
Step 8 Remove the front and rear doors of the smart cooling product.
● Before removing the smart cooling product front door, you need to remove the
ground cable terminals at the bottom of the front door.
● Place the removed front door with the LCD side facing upwards in an open
area, and protect it with sponge if necessary to prevent scratches.
Issue 01 (2021-04-20)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
62