Huawei FusionDC1000A Maintenance Manual page 71

FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario)
Figure 4-6 Removing the front and rear doors of the smart cooling product
1.
2.
3.
4.
Issue 01 (2021-04-20)
Open the locks on the front and rear doors of the smart cooling product using
keys, and open the smart cooling product rear door.
Remove cables from the LCD on the front door, and cut off cable ties using
diagonal pliers.
NO TICE
Verify that the thermal insulation foam is not damaged during the operation.
Remove the front door, rear door, and hinge bases from smart cooling product
C1.
Unfasten the eight rotating baffle plates in the upper, middle, and lower
positions of the air filters, and remove the upper and lower air filters.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
63