A0013 Ready For Power On - Bosch Rexroth IndraDrive Troubleshooting Manual

Rexroth IndraDrive

A0013 Ready for power on

DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
Supported by Supply Unit:
The A0013 Ready for power on diagnostic message signals that the
drive is provided with control voltage and that there isn't any error present
in the drive.
The drive is ready for power on.
Note: This status is displayed on the control panel of the drive with
"bb" ("betriebsbereit" = ready for operation).
A0013 - Attributes
Display: bb
Mess. no.: A0013 (hex)
Status Diagnostic Messages
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
HMV01
6-7