Handling, Diagnostic And Service Functions; 10.1 Firmware Update; 10.2 Firmware Download; Messages During The Firmware Download - Bosch Rexroth IndraDrive Troubleshooting Manual

Rexroth IndraDrive
10

Handling, Diagnostic and Service Functions

10.1 Firmware Update

10.2 Firmware Download

Messages During the Firmware Download

XX: DL

DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Handling, Diagnostic and Service Functions
See Functional Description "Firmware Update"
The firmware download is carried out with the auxiliary "loader" program.
The loader is either
• activated directly via the control section if there isn't any valid firmware
available in the device
- or -
• activated via the valid firmware available in the device if a firmware
update is to be carried out.
The active loader appears on the display. It precedes the download status
display:
• LD: ?????: the loader of the control section is active
• FL: ?????: the loader of the firmware is active
Note: Explanation of the messages displayed during firmware
download:
XX: ????? = active loader : download status
During error-free firmware download the following diagnostic messages
are displayed:
;; '/
;; (5$6(
;; 352*
;; &.6
Brief Description: Download -> Shutdown carried out successfully
A shutdown was carried out.
FL: DL: The firmware loader is active.
LD: DL: The loader in the control section is active.
Note: You can only exit the shutdown mode by rebooting (requested
via the master communication or by switching the drive off).
10-1