F9001 Error Internal Function Call; F9002 Error Internal Rtos Function Call - Bosch Rexroth IndraDrive Troubleshooting Manual

Rexroth IndraDrive

F9001 Error internal function call

Cause
Undefined cause
An error occurred in firmware (general software
error)

F9002 Error internal RTOS function call

DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
Supported by Supply Unit:
The device was switched off by the firmware.
Remedy
Switch device off/on. If error persists, replace device
Please contact our service department
F9001 - Attributes
Display: F9001
Mess. no.: F9001 (hex)
Supported by Firmware Variant:
Cause:
An error occurred in the firmware (general software error). The drive was
switched off by the firmware.
Remedy:
Please contact our service department.
F9002 - Attributes
Display: F9002
Mess. no.: F9002 (hex)
Error Messages
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
HMV01
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
7-3