Samsung OfficeServ 7200 Technical Manual page 92

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

OfficeServ 7200

TECHNICAL MANUAL

3) Next, program hunt group to include the common bell.

4) Assign the trunk to ring the hunt group containing the common bell. Common bell

control can be used with station hunt groups, individual stations and universal

answer.

7.2.5 Ring Over Page

When a customer-provided paging system is installed, incoming calls can be assigned

to ring over page. Program the C.O. line or C.O. lines to ring a hunt group. Using MMC

601 assign the DN number of the Page Output (voice) for the MIS board being used as

a member of the group or as the NEXT PORT for the overflow destination. Other

stations may be assigned to the same group to provide ringing to phones and the

paging system at the same time.

FUNCTION # in MMC 724

7.2.6 Connecting OfficeServ Manager

OfficeServ Manager is a computer application that provides various maintenance and

management functions for the OfficeServ 7200.

The minimum requirements for a PC running OfficeServ Manager (OSM) are as follows:

Platform

CPU

Main memory

Hard disk

CONNECTING OFFICESERV MANAGER (OSM) TO LAN PORT

The OSM application can only communicate to the OfficeServ 7200 system via the LAN

connection. The OSM PC can connect to the MCP via LAN connection using a

customer provided LAN switch or using the LIM module as shown in Figure 7.32.

• Set up the MCP LAN parameters in MMC 830.

MIS

Table 7.4 OfficeServ Manager Specification