Samsung OfficeServ 7200 Technical Manual page 90

OfficeServ 7200
TECHNICAL MANUAL
The Page Zone Relay ports assigned to each dry contact pair are listed in the following
table. Assign the DN number to the selected page zone using Default DN (Ports).
HARDWARE
ITEM
Page Tip & Ring
Contact Pair #2
Contact Pair #3
Dry contact #1
(For common bell)
Dry contact #2
(For external page)
Dry contact #3
(For external page)
External Amplifier for Paging
Amplified Speaker for Loud Bell Output
Figure 7.30 Connecting External/Additional Page Equipment
• MISC 1 and MISC 2 ports are located on the front panel of the MCP.
Dry Contact
Dry Contact is a switch that can connect or cut the power or line to external
equipment.
7.2.3 Loud Bell Interface
When a station requires loud ringing, assign or pair that station to an audible ring tone
output on the MIS daughter board using MMC 205.
MISC
FUNCTION # in MMC 724
03
06
07
Page Tip & Ring (Voice)
PINS 3 & 6
Loud Bell Output (Tone)
PINS 1 & 8
7.25
Table of Contents
Home Page
INSTALLATION
PART 7 SEPTEMBER 2005
DEFAULT
DN (Ports)
3751
3752
3753
MISC 2
MISC 1