Samsung OfficeServ 7200 Technical Manual page 50

OfficeServ 7200
TECHNICAL MANUAL
The components on the front panel of the 4DSL have the functions below:
Ports & LEDs
P1~P4
LAN
P1~P4 LED
FUL
100
ACT
LNK
Refer to figure 3.33 below for the wiring in P1~P4.
P1-P4 Port (RJ-45)
PinNo. 1 2
P1-4 - -
LAN Tx+ Tx- Rx+
Table 3.17 Ports and LEDs of the 4DSL
Function Description
Ports that connect the VDSL.
Ethernet port of 10 BASE-T/100 BASE-Tx for connecting with the
higher-level Intranet.
These LEDs indicate the status of the ports.
- Off: The link is not connected.
- On: The link is operating.
- Blink: The data is being transmitted/sent.
Checking Full/Half duplex Operation(LED on at full)
Checking 10/100 M speed(LED on at the speed, 100 M)
LED Blinks on transmission/receipt of data
Checking if the link is connected.
3 4 5
- TIP RING
- -
Figure 3.33 Ports (P1~P4) Wiring Pinout
3.32
Home Page
PART 3 SEPTEMBER 2005
6 7 8
- - -
Rx- - -
Table of Contents
INSTALLATION